PET Strapping

General Purpose PET Strapping

All-purpose polyester strapping for sealing, bundling and unitising cartons, cases and general palletised loads.

Width range
9 – 19 mmCustom widths on request
Thickness range
0.50 – 1.00 mmSection to suit the load
Breaking strength
150 – 450 kgfWidth and thickness dependent
Colours
Green, black, blueNatural and custom shades to order
Core
200 mm ID406 mm on request
Mode of use
Manual or machineHand tools and semi-automatic units
Overview

General Purpose PET Strapping, Built For The Line

General Purpose PET Strapping is our general-purpose polyester (PET) strapping — the everyday workhorse for carton sealing, case bundling and unitizing goods on a pallet. It is made from 100% PET resin, giving it a high strength-to-weight ratio, good elongation recovery and resistance to moisture, unlike fibre or paper-based alternatives.

It runs cleanly through both hand tensioning tools and semi-automatic strapping heads, with a smooth pay-off that reduces snagging on the line. Widths, thicknesses and coil sizes can be produced to match your existing strapping equipment.

Custom widths on request Bulk & export orders Sample coils available
Coils of general purpose green PET strapping
Why It Works

Key Features

Strong for its weight

High tensile strength relative to strapping thickness, so loads stay secure without excess material.

Weather & moisture resistant

PET will not rot, rust or lose strength when exposed to humidity — unlike paper or fibre strapping.

Smooth, consistent pay-off

Precision-wound coils feed cleanly through hand tools and machine heads with fewer stoppages.

Recyclable construction

100% PET strapping can be recycled at end of life, in line with most facility waste streams.

Technical Data

Specifications

Material100% Polyester (PET)
Width range9 – 19 mm
Thickness range0.50 – 1.00 mm
Breaking strengthapprox. 150 – 450 kgf (width / thickness dependent)
Elongation at breakapprox. 10 – 14%
Coil lengthapprox. 1,000 – 3,000 m (width / thickness dependent)
Core diameter200 mm (8″) ID standard; 406 mm (16″) on request
Typical coil weightapprox. 15 – 20 kg per coil
Surface finishSmooth or embossed
Colour optionsGreen, Black, Blue, Natural — custom colours on request
Operating temperatureapprox. -30 °C to +60 °C in service
UV resistanceGood; UV-stabilised grade available for outdoor storage
Packaging methodCoils on cores, shrink-wrapped and palletised for freight

Figures shown are indicative typical ranges for this product line and are provided for guidance only. Exact specification, tolerances, coil size and packaging are confirmed against your order — request a signed technical datasheet from our sales team before specifying.

Where It's Used

Applications

Carton sealing
Case bundling
Palletizing cartons
General warehousing
Retail distribution
Printing & paper reels
Colour Variations

Available Colours

Supplied green as standard, with black, blue and natural produced routinely. Any of the four can be specified against a single order line.

Green The industry default for polyester. Reads as PET at a glance on a mixed pallet. Standard
Black Highest UV tolerance in the range — the usual choice for loads staged outdoors. Standard
Blue Colour coding for a route, a customer or a grade, distinguishable across a floor. Standard
Natural / Clear Unpigmented polyester. Lets a printed or embossed mark stay legible along the strap. Standard

Colour is added to the melt during extrusion, so it runs through the full section of the strap rather than sitting on the surface — it cannot scuff off against a carton or a forklift tine. Standard colours carry the normal minimum order; a bespoke shade needs a dedicated run and is matched against a sample first. Break strain, elongation and weld quality are held level across every colour.

Specialty Options

Built To Your Specification

The general purpose grade is the most widely specified strap we make, so it is also the one with the most build options. Combine them freely.

UV Resistant A stabiliser package carried in the polymer, for coils and strapped loads that stand in direct sun rather than under a roof.
Smooth Or Embossed An embossed face grips the seal and the load harder and cuts strap-to-strap slip; a smooth face feeds more quietly through an automatic head.
Coloured Pigmented through the section in any of the colours above — for grade marking, route sorting or a house colour.
Printed Strapping Your name, a batch code or a handling instruction repeated down the strap, subject to order volume.
Custom Core & Coil Built to the core diameter, coil weight and traverse your dispenser or machine magazine is already set up for.
Heavy-Duty Section A thicker, wider section where the load needs more break strain than the standard grade carries.
Documentation

Datasheets & Downloads

Procurement documentation for General Purpose PET Strapping is issued on request, so you always receive the revision that matches your order. Tell us the width and gauge you are specifying and we will send the current set by email.

Need something else — a compliance declaration, certificate of analysis or bespoke specification sheet? Ask our technical team.

Ready To Order General Purpose PET Strapping?

Tell us your widths, volumes and delivery location — we'll get back with pricing and lead times.

Request a Quote