PET Strapping

Embossed PET Strapping

Embossed, woven-texture polyester strapping that grips buckles and tensioning tools securely on demanding packing lines.

Width range
12 – 16 mmCustom widths on request
Thickness range
0.60 – 1.00 mmHeavier section available
Breaking strength
250 – 500 kgfWidth and thickness dependent
Colours
Green or blackCustom shades to order
Core
200 mm ID8″ standard
Mode of use
Manual or machineFriction-weld and heat-seal tools
Overview

Embossed PET Strapping, Built For The Line

Embossed PET Strapping is finished with a woven, embossed surface texture rather than a smooth face. That texture gives buckles, friction-weld joints and tensioning wheels more to grip onto, which matters on lines running dense or vibration-heavy loads where a joint slipping is not an option.

It carries a higher break strain than standard General Purpose PET Strapping at comparable widths, and holds its tension well as a load settles during transit — a common cause of strapping loosening with lower-grade material.

Custom widths on request Bulk & export orders Sample coils available
Embossed PET strapping coils with a high-friction ribbed surface
Why It Works

Key Features

High-grip embossed face

Woven surface texture improves grip on friction-weld and buckle joints.

Retains tension after transit

Good elongation recovery keeps strapping snug even as loads settle and vibrate.

Machine-ready winding

Consistent traverse winding for high-speed automatic and semi-automatic lines.

UV & moisture stable

Holds up in open-sided warehouses and outdoor storage yards.

Technical Data

Specifications

Material100% Polyester (PET), embossed finish
Width range12 – 16 mm
Thickness range0.60 – 1.00 mm
Breaking strengthapprox. 250 – 500 kgf
Elongation at breakapprox. 10 – 14%
Coil lengthapprox. 1,500 – 2,500 m
Core diameter200 mm (8″) ID standard
Typical coil weightapprox. 15 – 20 kg per coil
Surface finishEmbossed high-friction pattern
Colour optionsGreen, Black — custom colours on request
Operating temperatureapprox. -30 °C to +60 °C in service
UV resistanceGood; UV-stabilised grade available on request
Packaging methodCoils on cores, shrink-wrapped and palletised for freight

Figures shown are indicative typical ranges for this product line and are provided for guidance only. Exact specification, tolerances, coil size and packaging are confirmed against your order — request a signed technical datasheet from our sales team before specifying.

Where It's Used

Applications

Brick & block bundling
Bottled multi-packs
Timber bundling
Automated strapping lines
Export crates
Textile bale bundling
Colour Variations

Available Colours

The embossed grade is produced in green and black. The textured face reads slightly matt against a smooth strap of the same colour, which is itself a useful way to tell the two grades apart on a rack.

Green The industry default for polyester. Reads as PET at a glance on a mixed pallet. Standard
Black Highest UV tolerance in the range — the usual choice for loads staged outdoors. Standard

Colour is added to the melt during extrusion, so it runs through the full section of the strap rather than sitting on the surface — it cannot scuff off against a carton or a forklift tine. Standard colours carry the normal minimum order; a bespoke shade needs a dedicated run and is matched against a sample first. Break strain, elongation and weld quality are held level across every colour.

Specialty Options

Built To Your Specification

The embossed face is the defining feature of this grade. Everything else about it is still built to your specification.

UV Resistant A stabiliser package carried in the polymer, for coils and strapped loads that stand in direct sun rather than under a roof.
Coloured Pigmented through the section in any of the colours above — for grade marking, route sorting or a house colour.
Printed Strapping Your name, a batch code or a handling instruction repeated down the strap, subject to order volume.
Custom Core & Coil Built to the core diameter, coil weight and traverse your dispenser or machine magazine is already set up for.
Heavy-Duty Section A thicker, wider section where the load needs more break strain than the standard grade carries.
Low-Elongation Grade A stiffer grade that gives up less length under load, for dense goods that must not settle in transit.
Documentation

Datasheets & Downloads

Procurement documentation for Embossed PET Strapping is issued on request, so you always receive the revision that matches your order. Tell us the width and gauge you are specifying and we will send the current set by email.

Need something else — a compliance declaration, certificate of analysis or bespoke specification sheet? Ask our technical team.

Ready To Order Embossed PET Strapping?

Tell us your widths, volumes and delivery location — we'll get back with pricing and lead times.

Request a Quote